HIC

Ask ScooterDad: I have a mgp vx5 extreme complete. It has oversised bars and i want to change go stamdad Apex bol bars. Will it fit/work? If not what do i do?

Submitter's Name: 
Jake
Submitter's Location: 
Usa
Answer: 

Apex Bol bars come in standard or oversized, so you can stay with oversized bars. If you want to go to standard diameter bars, you'll have to change your compression system from HIC to SCS or IHC.

Ask ScooterDad: I am buying HiC bars but i have IHC forks, do i need to get new forks as mine came with envy kos 2013 complete or can i just put the bars on the IHC forks as is

Submitter's Name: 
Daniel
Submitter's Location: 
Auckland, New Zealand
Answer: 

If you have IHC forks and you want to use oversized bars, you'll need to replace the fork with a standard (non-IHC) fork. You'll also need to do one of two things:

  • Use HIC compression with a slit in your bars and an oversized clamp

OR

  • Use full-size SCS compression that can accomodate oversized bars WITHOUT a slit

While some people may tell you that you can add a shim to make your IHC fork work with HIC or SCS, you should not use that as too many shims will make the system unstable.

Ask ScooterDad: I have just bought some oversized bars and I wanted to know if it's possible to put the oversized bars on a regular mgp fork

Submitter's Name: 
Angel Jordan
Submitter's Location: 
Pomona
Answer: 

Many MGP scooters come with HIC, which would work with oversized bars. If you're using SCS with your MGP fork, you'd need to go to HIC compression with an oversized clamp and slit in your bars OR full-size SCS (that can accomodate oversized bars) WITHOUT a slit in your bars.

Ask ScooterDad: i have hic and i want to run standard size bars what should i do

Submitter's Name: 
finbar
Submitter's Location: 
England \ Isle of wight \ bembridge
Answer: 

You can't run HIC with standard diameter bars. It's impossible. They are the same diameter (or close), so one won't fit inside the other. However, IHC is a lot like HIC for standard diameter bars. You'll need a tapered IHC fork to do this.

Ask ScooterDad: i have a fuzion x 3 and i was wondering is it poosible to upgrade to a hic system

Submitter's Name: 
mike
Submitter's Location: 
upland ca
Answer: 

You could upgrade the Fuzion X3 to HIC, but you'd have to replace the fork, headset, clamp, and bars. That's probably close to twice the cost of the scooter.

Ask ScooterDad: Hi i run an ao delta complete(HIC) and i want to buy the ethic almasty bar in IHC but I'm not sure if they will fit.

Submitter's Name: 
malikjr11
Submitter's Location: 
W129DT
Answer: 

If your scooter has HIC and you want to run standard diameter bars with IHC, you'd need to replace the fork and clamp, in addition to the bars. IHC requires a tapered IHC fork and a standard diameter bars as well as a standard diameter clamp.

Pages