Fork

Ask ScooterDad: I have an vx5 pro and I want to switch compressions to scs what would I have to get?

Submitter's Name: 
Will
Submitter's Location: 
Niagara Falls Ontario Canada
Answer: 

As the VX5 Pro comes with IHC, you'll need to replace the fork with a standard threadless fork. Then you just need to cut the slit off your bars and use an SCS clamp.

Ask ScooterDad: I'm getting oversized apex Bol bars for my vx5 pro and it has ihc compression what will I need to get to make the rest of my scooter

Submitter's Name: 
William anderson
Submitter's Location: 
Niagara fall Ontario Canada
Answer: 

Oversized bars are not compatible with IHC, so you'll need to get a new fork (standard threadless) and either a fullsized SCS or an oversized clamp and HIC shim.

Ask ScooterDad: i have a razor pro xx and was wondering if i could install a threadless fork?

Submitter's Name: 
jonathon
Submitter's Location: 
midland
Answer: 

Yes, you can install a threadless fork, but you'll also have to replace the headset with a threadless headset and use some kind of compression. Depending on what compression you go with will determine what kind of clamp and bars you can use. So, yes, you can do it, but it's a lot more involved than just replacing the fork.

Ask ScooterDad: Hi I have a fasen Raven and I'm thinking of ordering oversized apex Bol bars with a pre cut slit, will I have to get a different clamp

Submitter's Name: 
Ben McSorley
Submitter's Location: 
Stamford, England
Answer: 

The Fasen Raven uses an IHC fork and IHC compression with a standard diameter clamp and standard diameter bars. You wouldn't be able to use any oversized bars without changing out your fork, clamp, and compression system.

Ask ScooterDad: I have the madd gear vx5 team and I want to switch to scs compression, do i need new forks or do the ones that come stock work with scs.

Submitter's Name: 
Reggie
Submitter's Location: 
Canada
Answer: 

The Madd Gear VX5 has an IHC fork, so you'd need to replace the fork with a standard threadless (non-IHC) fork.

Ask ScooterDad: Will HIC bars fit on IHC forks?

Submitter's Name: 
Bailey
Submitter's Location: 
Australia
Answer: 

You could technically make them fit by stacking an HIC shim on top of the IHC shim, but you should NOT do that as it will be very unstable.

Pages